Friday, January 31, 2014

Valentine Heart Card

 
Dimensions 5.50 by 4.25
Pink cardstock  2.50 by 5.50
Embossed pink card stock
Used cricut cartridge Art Philosophy
Heart cut at 4.00
Ran  red ribbon threw the heart open areas
Glitter on bow
Used stampin up stamp set For Love Of Chocolate to stamp candy box
Used stampin up stamp set That's the Ticket
Fuzzy cut ticket shape.


Thursday, January 30, 2014

Cookie Card

 
Dimensions 5.50 by 4.25
Used foil card stock on back ground
Embossed the foil card stock
Foil card stock cut at 5.25 by 4.00
Cut 3 circles at 2.00
Used Accent Essentials cartridge to cut circle.
Embossed the 3 circles and inked edges and inked lightly over embossed circles
 Hand cut out banner at 2.00 by 1.00 in brown card stock
Hand cut out banner at 2.25 by 1.25 in white card stock
 I used stampin up stamp set for the love of Chocolate for chips and saying
Stamped out chips and fuzzy cut them
Each cookies have four chips
Added button and twine
 
 


Tuesday, January 28, 2014

How to Make Cling Rubber Stamps

 
 
Also stampin up  sells Clear-Mount Cling Foam
Item is 124236
The size is 8 1/2 by 11.00
I do not sell it but I do use the cling foam

Monday, January 27, 2014

Mini bag tutorial


Thursday, August 16, 2012

Mini bag tutorial

I made this mini bag with 11"x 8.5" card stock. No cutting only folding Of course you need to cut when you decorate.
 
 
 


 



Sunday, January 26, 2014

Blender pen refill recipe for stampin up Markers

Blender pen refill recipe

Large recipe:
2 Tbps + 2 Tsp. glycerin
5 Tbps distilled water
1 tsp. rubbing alcohol

Small recipe:
2 tsp. glycerin
4 tsp. distilled water
1/4 tsp. rubbing alcohol

This recipe is to be used with Stampin' Up!® blender pens and not to be confused with Copic blender pens, which are ethanol based. The Copic blending solution is used for fixing mistakes & making colors lighter. This recipe is for blending water based ink colors.
You don't have to remove the tips becasue you can just use an eyedroper onto the tips until it soaks in, but its' quicker if you want to remove the end piece and pour refill directly onto the end of the
center cavity. You might want to start with a small recipe since the pens don't hold much. Left over refill can be stored in a small airtight container. This recipe came from web sight tips4markers.
tips4markers.blogspot.com
 They also carry the stampin marker up refill tips.

Directions on replacing your tips

1. With a paper towel or tweezers, remove the worn tip by just pulling it out gently and discard. 2. This is a good time to refill your marker with ink. 3. Holding onto the brush end of the new tip, gently and firmly insert the smaller diameter end into the Stampin’ Up! marker. 4. Allow about 15 minutes for the new color to infuse into the new tip before use.

Saturday, January 25, 2014

Trim The Tree Bird Box or Gift box

Trim the Tree


I whipped up a little something myself this month that I am pretty excited to share with you as well!  When I was a little girl, I was quite interested in miniatures & dollhouses.  Needless to say, I was thrilled to see the trend of scaled down houses all over CHA this year.  While looking at my new Nestabilities Long Rectangles dies, it occurred to me how easy it would be to put together my own version with  the creation of a basic template and a few dies!   SO here's the template that I am providing to you as a FREE download!!!
Download birdhouse_template.pdf
Cutting_template I printed  my template  directly onto our Classic Kraft card stock.  I used a ruler and a craft knife to trim out the template using my Scor-Mat
.....................................................................................
Scoring I then slid out my Scor-Mat and scored the dotted lines of the template right there on my Scor-Pal.  I love how I was able to go straight from cutting to scoring all on the same tool.  Just awesome!
.....................................................................................
Finished_scoring Since I scored on the side of the template with the printed lines, the *good side* of the card stock is scored perfectly and all of the printing will be on the inside of the house.
.....................................................................................
Punching_hole I stamped the card stock with Polka Dot Basics using white ink.  I also punched a circular opening in the front using a 3/4-inch circle punch.
.....................................................................................
Nesties I die-cut a long scalloped rectangle and a scalloped square from Pure Poppy using the Nestabilites I mentioned at the beginning of this post.  (In my photos, I have used red and green to help you to tell the two pieces apart.)
.....................................................................................
Pieces_of_house I scored the long rectangle in half to form the peak of the roof.  The square is left the way it is.  I assembled the house by adhering the side tab together.  I colored & cut out a small leaf & berry image from Believe to mount under the front opening.
....................................................................................
Setting_eyelet In order to make the house a bit more sturdy, I set an eyelet in the peak of the roof using my Crop-a-dile.
....................................................................................
Ornament_loop I threaded some hemp twine through the eyelet and knotted it on the underside to prevent it from pulling through.  Notice my little poly shrink tag made with the "Peace on Earth" sentiment from Believe.  I colored & cut out an additional sprig of greenery to attach to the tag after it had been shrunk.  A bit of our new Pure Poppy satin ribbon is tied to a jump ring that was threaded through the tag.  The piece added a nice detail to the top of the ornament.
....................................................................................
Peaceful_birdhouse_2 After assembly, here's the finished project.  I think it makes a really cute little house, quick & easy!  I will be making these for the teachers this year I think.  I made today's sample really simplified, but with all of your creative imagination, the sky is the limit!  You could add windows or chimney.  Add glittery icicles or snow drifts around the bottom.  You can have something climbing or crawling out of your openings.  You could make one for Halloween or any other holiday!  You could cut the basic pieces for the house for several children at once and let them showcase their individual talent.  The results would be a fantastic way to decorate an entire tree!  I challenge you to take this basic concept and make something of your very own!  Have fun and happy stamping!!!

Suppliestools

..........................................................................................
Stamps: Believe, Polka Dot Basics
Ink: Noir Black Palette ink, white pigment ink
Paper: Classic Kraft & Pure Poppy
Other: Pure Poppy satin ribbon, Copic  markers, hemp twine, translucent poly shrink from Lucky Squirrel
ETA: I'm so glad that many of you are planning on trying this template out for yourselves!  Some of you asked about the dimensions of the roof & base if you do not on the Nest abilities.
Roof: 3.75 x 2 inches (scored in half)
Base: 2 x 2 inches
Also, a few of you inquired about the specific Nest abilities required.  This information is already conveniently located on the template print out, but I have listed it below as well for you...
Roof: Spellbinder's Nest abilities, Long Classic Scalloped Rectangles, Small Set (3rd smallest rectangle)
Base: Spellbinder's Nest abilities, Classic Scalloped Squares, Small Set (3rd smallest square)
Enjoy!  And if you create a project using this template, please be sure to link it in the comments section so I can take a peek at your creativity!!!

 

               
            
                
               
               
               
               
               
               
                               
               
               
               
 
        
 
 
 
 






     

    Shaped Valentines Day Card

     
    Dimensions 5.25 by 4.25
    This card was a free svg file I cut
    Layer same size as heart
    Glitter  added to heart
    Liquid pearls
    Gold velum used to cut out heart and butterfly
    Cuddle bug cut butter fly and embossed
    Heart came from Sweet Heart cartridge
    Heart cut at 1.25 and embossed
    The free file came from www.birds.com
    

    Friday, January 24, 2014

    Card in Box

    Card in a Box!
    I hope this post isn't too long!  
    We have all been working on many different projects - so I thought I would share my newest project! 
    I found this technique on Pinterest (of course)  -and fell in love with it!  Monica Gale does a fabulous video with great instructions!  She does do the measurements in Centimeters.  I will give you the measurements in inches below.  At least it is the measurements I used.  Check out her video first to get an idea of how to make this adorable card/box!
    I used a piece of 12 x 12 card stock and cut it at 5 7/8.  You will score on the 12 inch side at
    2 3/4, 5 1/2, 8 1/4 and 11 inches.   Then turn your card stock so the short side is at the top of your score board and score at 2 3/4.   You can follow Monica's instructions from here.  I didn't add the measurements for the decorative paper since I think everyone may have a different idea of how much of a rim they like to have showing around your decorative paper.
     
    For the inserts measurements - I used 3.75 inches x 1 inch and then scored each end at 1/2 inch.

    I used the owl punch to make the little penguins.  Their little flippers are the ears of the owls. I love that Stampin Up punch!
    www.callalilystudio.blogspot.com
     
     

    Thursday, January 23, 2014

    How to make an a2 gatefold card and Cricut to make mine with

     
     From www.passion4carfting.com


    Dimension are 5.25 by 8.00
    Used free svg file found on net
    Paper pierced the edges
    Used cuddle bug to cut out butterflies in gold vellum
    Embossed vellum
    Stamped on card stock
    Ribbon in gold and white
    

    Friday, January 17, 2014

    Happy Valentines Envelope on Front Card

     
    Dimensions 5.25 by 4.25
    Used Sweetheart cartridge to cut envelope
    Envelope  cut  at 2.25
    Used stampin up stamp set called That's the ticket
    Stamped out ticket and fuzzy cut out
    Stamped postage out and fuzzy cut
    Added glitter to stamped heart and cut out heart
     
    

    Wednesday, January 15, 2014

    More Valentines Cards


     Dimensions 4.25 by 5.25
    Cut  two pieces  of string size of card
    Used Love Struck 2010 cartridge to cut hearts
    Pink hearts at .50  and cut out six
    Red hearts cut at .50  and cut five
    Dark pink hearts cut at .50 and cut five
    Glitter added
    Liquid pearls
    Stamped greeting on card front
    Diemensions 5.25 by 4.25
    Cut brown card stock front in half
    Embossed pink card stock and cut 5.25 by 1.85
    Added lace
    Punched out red heart
    Liquid Pearls on red hearts
    Used Love Struck 2010 cartridge
    Couple cut at 3.25 and layer
    Dimensions 5.25 by 4.25
    Closed heart front
    Cut boarder at 3.00 by 9.00
    Used  Martha Stewart Crafts cartridge
    Cut a white strip of card  stock at 5.00 by 2.50
    Embossed it
    Cut heart at 2.25 and wield the heart with gypsy to make card front
    Cut another heart in white at 1.50 and embossed put on top of red heart
    Heart open
    Liquid Pearls in white and red
    Cut  white heart  to put in side and stamped be mine
    White heart cut at 2.00
     

    Tuesday, January 7, 2014

    Three Valentines Day Cards

     
    Dimensions 5.50 by 4.25
    Pattern card stock is fabric card stock
    Fabric card stock cut 5.50 by 4.25
    Used old post card cut down 3.00 by 5.00
    Inked edges of old post card
    Stamped heart on post card and glitter it
    Make small envelope with envelope punch board
    Envelope size is 2.50 by 3.00
    Used vellum card  stock for envelope
    Stamped saying on envelope
    Punched out hearts is different colors and put inside envelope
    Punched out hearts again at 1.00
    Added string
    Hand colored roses
    Dimensions are 5.50 by 4.25
    Embossed white card stockyard stock cut at 5.50 by 4.25
    White embossed c
    Used circuit cartridges  Victorian Romance
    Hot air balloon cut at 3.25 and layers
    Banner cut at 1.25
    Love cut at .50
    Glitter added and liquid pearls
    Chalked over banner
    Dimensions 5.50 by 4.25
    Embossed red card stock
    Red card stock cut at 5.50 by 4.25
    Used cartridge Love Struck 2010
    Heart cut at 3.25
    Love cut at 1.00
    Added pearl
    Gold added to word love and heart